Flange Type Activated Pressure Reducing Valve

Product Description

To meet clients diverse expectations, we are able to offer pristine quality Flange Type Activated Pressure Reducing Valve. This valve is manufactured by making use of top notch quality raw materials and ultra-modern technology in complete compliance with set market norms at our sophisticated production unit. Offered valve is used for maintaining the pressure of liquid and gas. Additionally, customers can purchase this Flange Type Activated Pressure Reducing Valve from us a reasonable rates.

Features:

Product Accent:

• Pressure reducing valve prevents pipeline breakage which is caused due to high pressure.
• Pressure reducing valve is installed in water supply pipeline. It helps in maintaining setting outlet pressure in the main valve, regardless of different inlet pressure.
• Pressure reducing valves can be installed in air conditioning, water supply and fire control systems so as to maintain the setting outlet pressure.
• To control the main valve, pressure reducing valve uses a sub-valve (pressure reducing pilot valve). When outlet pressure reaches to the setting range of pressure reducing pilot valve, the pilot valve automatically senses the outlet pressure. It further adjusts the pressure of back pressure chamber in the main valve so that the valve gate opens & consequently maintains outlet pressure.
  
  

• There is a pressure meter on pilot valve which shows the outlet pressure. When outlet opens up, the value of pressure meter is lowered.
• When this outlet is used for large flow, and gate generates quick-close motion, the pilot valve slowly responds to the main valve in order to close the gate. At this stage, the outlet pressure rises high, hence a tiny pressure reducing valve can be installed.
• Special order needs to be placed for size over 14 or particular fluid.
  
  

Flange Type-illustration

• Upper Cover : Bronze
• Main Body : Cast Iron
• U-ring : NBR
• Piston : Bronze
• Sealing Spacer : NBR
• Diaphragm Washer : Brass
• Shaft Guiding Seat : Bronze
• Center Shaft : Brass
• Diaphragm Fixed Washer : Electroplated Iron
• Diaphragm : CR/EPDM
• Fixed Bolt : Stainless Steel
• Fixed Bolt : Stainless Steel
• Spring : Spring Steel
• Lower Cover : Cast Iron
• Adjusting Stem : Stainless Steel
  
  

Pressure Adjusting Range

• 1 kgf/cm2, 5 kgf/cm2
• 4 kgf/cm2, 9 kgf/cm2
• (special order is needed for other range)
• Valve Body Testing Pressure: 21kgf/cm2
• Maximum Applied Pressure:
• 16 kgf/cm2
• Pressure needed from fully-closed gate to fully opened gate: 1 kgf/cm2
• (1 kgf/cm2 =14.2 psi)
• Applied Temperature: -15 ~ 80
• Applied Fluid: Fresh water 
  
  

Thread Type-illustration

• Gauge: Stainless Steel
• Upper Cover : Stainless Steel 304
• O-ring : NBR
• Body : Stainless Steel 304S
• Piston : Stainless Steel 304
• Sealing : NBR
• Shaft : Stainless Steel 304
• Diaphragm : NBR
• Fixed Bolt : Stainless Steel 304
• Diaphragm Washer : Electroplated Iron
• Spring : Spring Steel
• Spring Cover : Polyamide 66
• Spring Washer : Brass
• Adjusting Bolt : Brass
• Applied condition : Water
• Pressure Adjusting Range
• 1 kgf/cm2, 5 kgf/cm2
• 4 kgf/cm2, 9 kgf/cm2
• Valve Body Testing Pressure: 21kgf/cm2
• Maximum Applied Pressure: 12kgf/cm2
• Applied Temperature: 15^oC, 80^oC